Technical Parameter Reference
| Product Model | SRI8200-4A0B-E |
| Description |
4* Class A/Class B EtherCAT interface IO-Link master |
| Bus transmission | |
| Communication protocol | EtherCAT |
| Operating mode | Auto-negotiation mechanism, auto MDI/MDIX function |
| Transmission rate | 10/100 Mbps |
| Address assignment | System auto-assignment or DIP switch setting |
| Topology function | Supported |
| Power supply | |
| Operating voltage | 24 VDC(18~30VDC) |
| Module current consumption | Max 200 mA |
| System and input signal power supply | US, max 8 A |
| Auxiliary power supply | UA, max 8 A |
| Electrical isolation | US/UA: 24 V isolated, 0 V isolated |
| Interface type | |
| Power supply | 2 × L-code 5-pin, male (input) + female (output) |
| Bus communication | 2 × M12 D-code 4-pin, female |
| Signal connection | 4 * M12 A-code, female connector |
| Electrical parameters | |
| Number of IO-Link channels | 4 |
| IO-Link interface type | 4* Class A/Class B |
| IO-Link version | IO-Link V1.1 |
| IO-Link transmission rate | COM1 (4.8 kbps), COM2 (38.4 kbps), COM3 (230.4 kbps) |
| Interface signal type | DI/DO/IO-Link software-configurable |
| Number of input channels | Max 8 |
| Output supply current (Pin1 & Pin3) | IO-Link interface: max. 1.6 A; standard signal interface: max. 200 mA |
| Auxiliary supply current (Pin2 & Pin5) | Max. 2 A per interface |
| Input signal type | PNP type |
| Number of output channels | Max 4 |
| Max load current, input/output | Max 200 mA per channel |
| Output signal type | PNP/NPN type (configurable) |
| Output switching frequency | Resistive load 100 Hz, inductive load 5 Hz |
| Diagnostics | |
| Communication status | LED indication, communication message |
| Power supply monitoring | Yes, with undervoltage alarm |
| Short-circuit and overload protection | Yes, LED indication |
| Protection class | IP67 |
| Temperature range | Operating ambient temperature -20~60 °C (storage temperature -40~85 °C) |
| Mounting method | 2-hole screw mounting |