This example demonstrates downloading a project from MetaFacture to a PLC , and then uploading the program from the PLC to MetaFacture on another computer .
Section 1: Downloading the project to the PLC
1. MetaFacture in 192.168.110.37 , create a new standard project , and select " Sinsegye ..." as the device.
2. Connect to PLC
3. Click [File] in the menu bar — [Source code download]
4. Selecting a PLC
5. Menu bar: File - Close project
Section 2: Upload the project from PLC to MetaFacture
1. MetaFacture in 192.168.110.11
2. In the menu bar, click [File] - [Source Code Upload]
3. the PLC to upload the project from the scanned devices.
4. Specify the location where the program is placed locally
5.Select Open File
6.The file is uploaded from the controller to the local computer and opened in MetaFacture . If you encounter problems during the opening process, please refer to Opening a Project