Overview
SV3 servo panel consists of buttons and a digital display, which can be used for information and parameter display, parameter setting, user password setting, and general function execution.
Button Introduction
Functions of each button are shown in the following figure:
Take panel jog operation for example, the following case is for button usage:
Introduction of Panel Display
The panel display consists of 5-digit 7-segment digital tubes. When the servo drive is running, the display can be used for servo status display, parameter display, Error display and monitoring display.
Type of Panel Displays
| Type of Displays | Function description | Entry method | Sample |
| Status display | Display the current status of the servo, e.g., servo ready, servo running, etc | 1. While power on, enter immediately;2. Under the parameter display, press MODE key to enter;3. Under the monitoring display, enter when the motor is stationary; | |
| Parameter display | Display function code and the setting value | 1. Under the status display, press MODE key to enter;2. Under the monitoring display, press MODE key to enter;3. Under the Error display, first press SET key, then press MODE key to enter; | |
| Error display | Display the Error/Alarm codes of servo | 1. Under the parameter display, press MODE key to enter;2. Enter when a Error occurs; | |
| Monitoring display | Display the current operating parameters of the servo | 1. Under the parameter display, set function code of Group 21 and enter;Under the status display, set function code P05.03, enter after the motor runs; | |