Wiring Diagram
Terminal Description
| Wiring Terminal | Description |
| Output1 | Digital output channel 1 |
| Output2 | Digital output channel 2 |
| Output3 | Digital output channel 3 |
| Output4 | Digital output channel 4 |
| 24V | Positive pole of sensor power supply |
| 0V | Negative pole of sensor power supply |
| PE | Shielded wire |
COE Parameter Description
| Parameters | Description |
|
2001:01 EtherCATBusErrOutoutEN |
This parameter defines the action of the output channels when communication with the module is interrupted. (The setting will not be saved after power-off): 0: Output holds for 50ms and then clears 1: Output holds 2: Output holds for 10ms and then clears 3: Output holds for 20ms and then clears 4: Output holds for 100ms and then clears 5: Output holds for 500ms and then clears 6: Output clears immediately |
DC/Oversampling Parameter Description
| Parameters | Description | |
|
Operation Mode： |
Selection of number of channels: 2 Channels (Byte): Select to use two channels, Byte type 2 Channels (Bit): Select to use two channels, Bit type 1 Channel (Byte): Select to use one channel, Byte type (first channel) 1 Channel (Bit): Select to use one channel, Bit type (first channel) Note: When using the SRE5204 module, select 1 Channel to use the first two channels, and select 2 Channels to use all channels. |
|
|
Sync Unit Cycle Time (us) |
Cycle time, determined by the EtherCAT cycle time setting |
|
|
Oversampling Factor |
1，2，4，5，8，10，16，20，25，32，40，50，64，80，100，125，128; |
Sampling data (Bit) |
|
8(1*8)，16(2*8)，32(4*8)，40(5*8)，64(8*8)，80(10*8)，128(16*8)，160(20*8)，200(25*8) |
Sampling data (Byte) |
|
|
Sample Cycle Time (us) |
Sampling cycle is determined by the relationship between EtherCAT cycle time and the number of samples |
|
Codesys/Distributed Clock
(When using SRE5204 module, select 1 Channel to use the first two channels, and select 2 Channels to use all channels)
| Operation Mode | Remarks | |
| 1 Ch. - X times oversampling | X:2，3，4，5，8，10，16，20，40，50，100，200，400，1000 | Sampling data of Channel 1 (Bit) |
| 2 Ch. - X times oversampling | X:2，3，4，5，8，10，16，20，40，50，100，200，400，1000 | Sampling data for channels 1 and 2 (Bit) |