Definition and wiring description of power terminals

Definition of power supply and motor terminals

Definition of SIZE A main loop ports

Port classification	Connector	No.	Port Code	Port function	Content
Power input		1	L1C	Control power input	Single-phase AC200V ~ 240V, -10 ~ +10%, 50/60Hz
		2	L2C
		3	L1	Main power input	Single-phase/3-phase AC200V ~ 240V, -10 ~ +10%, 50/60Hz
		4	L2
		5	L3
Power output		1	P	Regenerative function and DC bus terminals	When the regeneration function is used, use Port P/B, as detailed in Section 2.5.
		2	B		For common DC bus applications, use P (DC+)/N (DC-) terminals, as described in Section 2.4.
		3	N
		4	U	Motor drive	Connect U/V/W three phases of the servo motor.
		5	V
		6	W

Definition of SIZE B main loop ports

Port classification	Connector	No.	Port Code	Port function	Content
Power input		1	L1C	Control power input	Single-phase AC200V ~ 240V, -10 ~ +10%, 50/60Hz
		2	L2C
		3	L1	Main power input	Single/3-phase AC200V ~ 240V, -10 ~ +10%, 50/60Hz
		4	L2
		5	L3
Power output		1	P	Regenerative function and DC bus terminals	When the regeneration function is used, use Port P/RB/B, as detailed in Section 2.5.
		2	RB
		3	B		For common DC bus applications, use P (DC+)/N (DC-) terminals, as described in Section 2.4.
		4	N
		5	U	Motor drive	Connect U/V/W three phases of the servo motor.
		6	V
		7	W

Definition of SIZE C main loop ports

Port classification	Connector	No.	Port Code	PortFunctions	Content
Power input		1	L1C	Control power supplyInput	220V model: single-phase 200V~240VAC, -10 ~ +10%, 50/60Hz380V model: single-phase 380V~440VAC, -10 ~ +10%, 50/60Hz
		2	L2C
		3	L1/R	Main power input	220V model: single/3-phase 200V~240VAC, -10 ~ +10%, 50/60Hz380V model: 3-phase 380V~440VAC, -10 ~ +10%, 50/60Hz
		4	L2/S
		5	L3/T
		6	P	Regenerative function and DC bus terminals	When the regeneration function is used, use Port P/RB/B, as detailed in Section 2.5.
		7	RB
		8	B		For common DC bus applications, use P (DC+)/N (DC-) terminals, as described in Section 2.4.
		9	N
Power output		1	U	Motor drive	Connect U/V/W three phases and earth PE terminal of servo motor.
		2	V
		3	W
		4	PE

Definition of SIZE D main loop ports

Connector	No.	Port Code	Port function	Remarks
	1	L1C	Control power input	Single-phase 380V~440VAC, -10 ~ +10%, 50/60Hz
	2	L2C
	3	R	Main power input	3-phase 380V~440VAC, -10 ~ +10%, 50/60Hz
	4	S
	5	T
	6	U	Motor drive	Connect U/V/W three phases of the servo motor.
	7	V
	8	W
	9	N2	Regeneration function,Common DC bus port, external reactance	When the regeneration function is used, use Port P/RB/B, as detailed in Section 2.5.
	10	N1		For common DC bus applications, use P (DC+)/N2 (DC-) terminals, as described in Section 2.4.
	11	P
	12	RB		N1/N2 are shorted by deError. It shall suppress high-order harmonics of power supply, remove the short-circuit wire and connect DC reactance between N1 and N2.
	13	B