Wiring Diagram
Note: A+ and A- are voltage signal input channels, and AI+ and AI- are current signal input channels. If CH0 needs to be connected to a voltage signal, it can be connected to A+ and A- terminals; if CH0 needs to be connected to a current signal, it can be connected to AI+ and AI- terminals; both channels are CH0 and occupy the same data address, so only one can be selected for use and both cannot be connected simultaneously. The same rule applies to other input channels. The wiring in the diagram is only an example, and specific connections can be made as needed.
Terminal Description
| Terminal | Description |
| A+,A- | CH0 voltage input terminal |
| AI+,AI- | CH0 current input terminal |
| B+,B- | CH1 voltage input terminal |
| BI+,BI- | CH1 current input terminal |
| C+,C- | CH2 voltage input terminal |
| CI+,CI- | CH2 current input terminal |
| ........ | ............ |
| ........... | ............ |
| H+,H- | CH7 voltage input terminal |
| HI+,HI- | CH7 current input terminal |
COE General Parameter Description
Configuration parameters will not be synchronized to Startup, and will not be saved after power-off or hot-plugging.
| Parameters | Data type | Description |
| 2004:01 | Err 24v_nf |
Bit0： 1: Channel 24V power supply abnormal 0: Normal |
| 2005:01 | Channel Num |
0: Enable 4 channels 1: Enable the first channel 2: Enable the first 2 channels |
| 2005:02 | Channel Time |
Channel update time: 0：400us 1：lms 2：2ms 3：5ms 4：10ms 5：20ms |
| 2005:03 | Channel Type |
Each Bit corresponds to one channel: e.g. Bit0: Corresponds to CH0 Bit1: Corresponds to CH1 ........ Set a detection value: 0: Voltage ±10V 1: Current 0-20mA |