Safety tips during assembly
Danger
● Operators must obtain electrical knowledge and have been trained on electrical equipment. Non-professional personnel are strictly prohibited for any operation!
Alarm
● Please read the user's manual and safety precautions carefully prior to installation!
● Do not install this product in places in strong electric field or with strong electromagnetic wave interference!
● Before installation, please make sure that the mechanical strength of installation positions is sufficient to support device weight. Otherwise, it might casue mechanical hazards.
● Do not wear loose clothing or accessories during installation, otherwise there might be a risk of electric shock!
● When installing the product in the enclosed environment (e.g., cabinet or chassis), please use the cooling device (e.g., cooling fan or cooling AC.) to cool the product sufficiently in order to meet the environment requirement on installation. Otherwise, it might cause product overheart or even a fire.
● It's strictly prohibited to modify this product!
● It's strictly forbidden to screw the fixing bolts and red marked bolts of parts and components of product!
● When the product is installed in a cabinet or terminal equipment which shall be provided with fire protection shell, electrical protection shell and mechanical protection shell. The protection level shall comply with relevant IEC standards and local rules and regulations.
● When it's necessary to install the equipment with strong electromagnetic interference such as transformer, please install shielding protection device to avoid misoperation of this product!
● Please install the product on flame-retardant metal, do not make flammable substances contact the product or attach flammable substances to the product, otherwise there might be a risk of fire.
Attention
● During installation, please cover the top of product with cloth or paper to prevent foreign articles, such as scrap metal, oil and water, from entering the product that could result in Errors. After operation, please remove the cover to avoid blocking the ventilation and affecting heat radiation, that results in abnormal heating of product.
● Resonance may occur when a machine at a constant speed runs at variable speeds. Here, it can effectively weaken the resonance to mount the anti-vibration rubber under motor frame or to utilize vibration suppression function.