Technical Specifications
| Product Name | 100M 5-Port Industrial Ethernet POE Switch | |
| Product Model | SG1125 | |
| Product Description | 5-Port 100M Unmanaged Industrial Ethernet POE Switch | |
| Bus interface | 5×RJ45 | |
| RJ45 port | 10/100BaseT(X) auto-detection, full/half duplex MDI/MDI-X auto-negotiation | |
| Network Protocol | IEEE802.3 10BASE-T; 100BASE-T IEEE802.3i 10Base-T; IEEE802.3u; IEEE802.3x; IEEE802.3af; IEEE802.3at | |
|
POE Standard |
Output Power: IEEE 802.3af Maximum Power 15.4W IEEE 802.3at Maximum Power 30W PoE Port Auto-Detection af/at PoE Power Supply Pins: Corresponding to Pin V+ (1,2) V- (3,6) |
|
| Operating temperature | -40℃~+80℃（-40℉~176℉) | |
| Storage temperature | -40℃~+85℃（-40℉~185℉) | |
| Relative humidity | 5%~95%, no condensation | |
|
Industry standards |
IEC(EN)61000-4-2(ESD): Contact discharge ±6kV, air discharge ±8kV IEC(EN)61000-4-3(RS): 6V/m(80~1000MHz) IEC(EN)61000-4-4(EFT): Power supply: ±2kV; ethernet port: ±1kV IEC(EN)61000-4-5(Surge): Power supply: ±2kV CM//±1kV DM Ethernet port: ±2kV CM//±1kV DM IEC(EN)61000-4-6(RF conducted): 2V(10kHz~150kHz), 6V(150kHz~80MHz) IEC(EN)61000-4-16 (Common-mode conducted): 20V cont. 200V, 1s Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
|
| Switching attribute | Transmission mode | Store and Forward |
| MAC Address | 2K | |
| Cache | 768kbit | |
| Backplane bandwidth | 1G | |
| Switching latency | <10μs | |
| Power consumption | <123W | |
| Power supply | Input POE voltage | DC48~57V |
| Input terminal | Phoenix terminal | |
| Dual power redundancy | Support | |
| Overcurrent protection | Supports built-in 4.0A overcurrent protection | |
| Reverse connection protection | Support | |
| Mechanical characteristics | Enclosure | IP40 protection rating, aluminum alloy enclosure |
| Installation | DIN rail mounting, wall-mounted installation | |
| Cooling method | Natural cooling, fanless | |
| Weight | 250g | |
| Dimensions | 117×73×29.6mm | |