Menu

S7-TCP address description

S7-TCP address description

For S7-TCP communication, the module port number is 102; the data addresses are described as follows:

Communication timeout
Address Description Attribute

VW704

(Low nibble valid; values above 5 are written as output hold)

Communication timeout (synchronized with the web page settings):
0: 200 ms
1: 500 ms
2: 1 s
3: 3 s
4: Output hold

R/W

ISDU configuration area
Address Description Attribute
VW906-VW944 VW906 Select the port to configure (select the corresponding port in decimal) R/W
VW908 ISDU index R/W
VW910 (bit0–bit7) ISDU sub-index R/W
VW910 (bit8–bit15) Data width (max 32 bytes) R/W
VW912 (bit0–bit7) Write (set to 1 to take effect) R/W
VW912 (bit8–bit15) Read (set to 1 to take effect) R/W
VW914-VW944 IO-Link slave function configuration R/W
Event query
Address Description Attribute

VW946-VW948

VW946 (bit0–bit7)

Select the event port number to operate

R/W

VW946 (bit8–bit15)

Select master or slave event
0: Master event
1: Slave event

R/W

VW948 (bit0–bit7)

Event index to query (if more than the max number is entered, the last one is read)

R/W

VW948 (bit8–bit15)

Clear all master-side events of this port (set to 1 to take effect)

R/W

Local digital output address
Address Description Attribute

VW950

VW950 (bit0–bit7)

Local digital output address (C/Q Output-PIN4)

R/W

VW950 (bit8–bit15)

Local digital output address (I/Q Output-PIN2)

IO-Link output address
Address Description Attribute
VW952-VW1952 IO-Link slave module output data area (arranged in sequence according to the configured output bytes of the slave modules) R/W
ISDU input address
Address Description Attribute

VW1954-VW1986

VW1954

Port status after successful write or read (displays 1 after successful configuration)

R

VW1956-VW1986

Slave function status after write or read

R

Event input address
Address Description Attribute

VW1988-VW1996

VW1988 (bit0–bit7)

Total number of master-side events already present on this port (a maximum of 255 are stored at the same time; when full, the oldest ones are overwritten)

R

VW1988 (bit8–bit15)

Power-on count (max 255)

R

VW1990-VW1992

Run time after power-on in seconds, cleared on power-down

R

VW1994

Indicates the event type
Bit4~Bit7 (high nibble): mode

1: single shot

2: disappeared

3: appeared
Bit0~Bit3 (low nibble): type

1: Notification

2: Warning

3: Error

R

VW1996

Event code; consult the slave manual for the corresponding description
Master:
0x1804: IO-Link mode C/Q short circuit
0x1805: PHY6360 over-temperature warning
0x1807: L+ power overcurrent
0x1813: C/Q mode overcurrent
0xFF21: IO-Link connected
0xFF22: IO-Link disconnected
Slave:
Event codes are defined by the connected IO-Link slave module.

R

Local digital input address
Address Description Attribute
VW1998 Local digital input address R
IO-Link input data address
Address Description Attribute
VW2000-VW2254 IO-Link slave module input data area (arranged in sequence according to the configured input bytes of the slave modules) R
Diagnostic information
Address Description Attribute

VW2256-VW2272

VW2256 (bit0–bit7)

Device status: (error overview; see the detailed diagnostic information for the specific ports)

Bit0: Short-circuit error (short circuit on master/slave)

Bit1: Cascaded module error (a cascaded slave has a module short circuit)

Bit 2: station configuration error (total byte count mismatch or port software configuration inconsistent with the hardware configuration)

Bit3: Reserved

Bit4: Ua undervoltage

Bit5: Ua overvoltage

Bit6: Us undervoltage

Bit7: Us overvoltage

R

VW2256 (bit8–bit15) Reserved R

VW2258 (bit0–bit7)

IO-Link connection status:

(Bit0: Port X01; Bit1: Port X02, and so on)

0: Not connected

1: Connected

R

VW2258 (bit8–bit15)

Configuration status, including the following cases:

(Bit8: Port X01; Bit9: Port X02, and so on)

0: Configuration correct

1: Configuration error

 

Configuration error self-check:

(1) Port configuration bytes are less than the slave attributes (input/output bytes) or the configuration exceeds 32 bytes

(2) The configured port model is inconsistent with the actually connected model (including inconsistency between the extension modules configured by extension-capable slaves and the actual modules)

(3) Port type inconsistent with the slave type, e.g. Class B type without Ua connected (undervoltage)

R

VW2260 (bit0–bit7)

Master port Pin1 short circuit:

(Bit0: Port X01; Bit1: Port X02, and so on)

0: Normal

1: Short circuit

R

VW2260 (bit8–bit15)

Master port Pin4 short circuit:

(Bit8: Port X01; Bit9: Port X02, and so on)

0: Normal

1: Short circuit

R

VW2262 (bit0–bit7)

Short circuit in the slave module connected to a master port:

(Bit0: Port X01; Bit1: Port X02, and so on)

0: Normal

1: Short circuit

R

VW2262 (bit8–bit15)

Port slave UA undervoltage:

(Bit8: Port X01; Bit9: Port X02, and so on)

0: Normal

1: Undervoltage

R

VW2264 (bit0–bit7)

Master port PIN2 short circuit:

(Bit0: Port X01; Bit1: Port X02, and so on)

0: Normal

1: Short circuit

R

VW2264 (bit8–bit15)

LED status:

(bit8: SF; bit9: BF)

0: Off

1: On

R

VW2266 (bit0–bit7)

For port X01:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2266 (bit8–bit15)

For port X02:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2268 (bit0–bit7)

For port X03:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2268 (bit8–bit15)

For port X04:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2270 (bit0–bit7)

For port X05:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2270 (bit8–bit15)

For port X06:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2272 (bit0–bit7)

For port X07:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

VW2272 (bit8–bit15)

For port X08:

Device status (0: Offline, 1: Online):

Bit0: Level 1 online status

Bit1: Level 2 online status

Bit2: Level 3 online status

Bit3: Level 4 online status

 

Short-circuit status (0: Normal, 1: Short circuit):

Bit4: Level 1 short-circuit status

Bit5: Level 2 short-circuit status

Bit6: Level 3 short-circuit status

Bit7: Level 4 short-circuit status

R

 

Previous
Modbus-TCP address description
Next
Local DI/DO address
Last modified: 2026-08-20