Internal 24V power supply ranges 20~28V; Max. working current is 200mA.
DI input power supply shall be external connection. Power supply voltage ranges from DC12 to 24V and can't exceed 30VDC.
Use twisted-pair shielded cable for high-speed/low-speed pulse port. Both ends of the shielded layer must be connected to PE. GND is reliably connected to upper machine signal.
DO output power supply must be external connection and ranges from 5 to 24V. Max. allowable voltage and Max. allowable current of DO port are DC30V and 50mA respectively.
The frequency division output of encoder should use twisted pair shielded cable. The shielding layer must be connected to PE at both ends. GND is reliably connected to the upper machine signal.
