Wiring Diagram
Terminal description
| Terminal | Instructions |
| V1+,V1- | CH1 voltage input terminal |
| V2+,V2- | CH2 voltage input terminal |
| V3+,V3- | CH3 voltage input terminal |
| V4+,V4- | CH4 voltage input terminal |
| I1+,I1- | CH1 current input terminal |
| I2+,I2- | CH2 current input terminal |
| I3+,I3- | CH3 current input terminal |
| I4+,I4- | CH4 current input terminal |
| 24V | Power positive |
| 0V | Power negative |
CoE- Online parameter description
In the configuration software, find "General Parameters" and check the "Expert Settings" option while offline. After going online, module parameters can be modified via CoE.
| Object dictionary | Subindex | Name | Meaning |
|
0x2000
|
0x01 |
AI Type |
AI range configuration: 0: ±10V (default) 1：0-10V 2：-10-0V 3：0-20mA 4：4-20mA |
|
0x02 |
Filter |
Filter configuration: 0：None 1：FIR Notch 50Hz 2：FIR Notch 60Hz 3：FIR LP 100Hz 4：FIR LP 1000Hz 5：FIR LP 3000Hz |
PDO parameters
| Address index | Instructions | Data type | Meaning | Remarks |
| AI Status（CH1~CH4） | No of Samples | USINT | Current sample count | Oversampling rate configurable at 1, 2, 4, 5, 8, 10, 16, 20, 25, 32, 40, 50, 64Default 4 channels with 1x sampling rate |
| bit0: Reserved | BOOL | Reserved | ||
| bit1：Underrange | BOOL | Underrange | ||
| bit2：Overrange | BOOL | Overrange | ||
| bit3-bit7: Reserved | BOOL | Reserved | ||
| AI Samples（CH1~CH4） | CHx Samples_ARRAY[0]..Samples_ARRAY[31] | DINT | AI sampling value 0 | |
| AI Timestamp | StartTimeNextLatch__Low | DINT | Lower 4 bytes of the local timestamp | |
| StartTimeNextLatch__Hi | DINT | Upper 4 bytes of the local timestamp |
DC/distributed clock parameters
| Parameters | Instructions |
| Operation Mode | 1/2/4 CH,-Oversampling （1、2、4、5、8、10、16、20、25、32、40、50、64）DC-Synchr |
| 1/2/4 CH,-Oversampling （1、2、4、5、8、10、16、20、25、32、40、50、64）SM-Synchr |