Section 1: New Project Panel
There are four ways to open the [New Project] panel:
- In the menu bar, click [File] > [New Project]
- ... ] under [Basic Operations] on the start page.
- Click the New Project icon on the toolbar
- Use shortcut keys Ctrl+N
The [New Project] panel is displayed as follows:
Section 2: Create a new empty project
1.Open the [New Project] panel, select [Project] as the category, select [Empty Project] as the template, enter a custom project name and the location to save the project, and click [OK].
2.Create an empty project with only the project name, and users need to add PLC , etc.
Section 3: Create a new standard project
1.Open the [New Project] panel, select [Project] as the category, select [Standard Project] as the template, enter the custom project name and project save location below, and click [OK].
2.Select a PLC in the [Device (D) ] list (If the corresponding PLC is not found , please confirm that the device has been installed correctly. For specific steps, please refer to Add Device ) Select a commonly used programming language in the [ PLC_PRG ( P) ] drop-down list and click [OK].
|
|
3.A standard project is created, including a device [ Device ], an application [ Application ], and a [ PLC_PRG (PRG) ] program.