Technical Specifications
| Model |
SRE6061 |
| Technical specifications |
| PROFINET Specifications |
V2.3 |
| PROFINET interface |
Dual Ethernet 100 Mbit/s, RJ45 connector |
| Cyclic data exchange |
Support |
| Acyclic data read/write |
Support |
| Diagnostic data and fault reading |
Support |
| Maximum number of slaves |
128 |
| Maximum data supported by a single slave |
1440bytes IN+1440bytes OUT |
| Maximum output data |
1.5Kbytes |
| Maximum input data |
1.5Kbytes |
| PN slave single polling cycle |
The polling cycle is configurable and allows different polling cycles for different slaves, with a minimum cycle of 2ms |
| PN network configuration file size |
512Kbytes |
| IRT |
Not supported |
| MRP – Media Redundancy |
Not supported |
| System redundancy |
Not supported |
| EtherCAT Specifications |
EtherCAT slave complies with IEC 61158 12 Type (ETG.1000) |
| ESI file |
Default |
| CoE |
Support |
| Network cycle time |
As low as 100 μs |
| Addressing mode |
Logic, nodes and locations |
| Command |
APRD, ARMW, APWR, BRD, BWR, FPRD, FPRW, FPWR, FRMW, LRD, LRW, LWR |
| Synchronous mode |
Free run |
| Link mode |
Dual Ethernet daisy chain |
| Isolation |
| Between channels and buses |
Yes |
| Between power supply and bus |
Yes |
| Between channel and power supply |
Yes |
| Display indication |
Power supply green LED display |
| System Power Diagnosis and Warning |
Support |
| Operating temperature |
Operating environment temperature: -20~60℃, relative humidity: 5%~90% (no condensation) |
| Storage temperature |
-40~60 °C |
| Dimensions (Length × Width × Height) |
15×100×80 (mm) |
Previous
SRE6061 | 1 Channel PROFINET Master gateway Module
Next
Indicator Description
Last modified: 2026-08-10
