Technical Specifications
| Model |
SRE6081 |
| Technical specifications |
| Maximum number of slaves |
63 |
| Maximum input/output of a single slave |
128 bytes |
| Support baud rates |
125kbit/s, 250kbit/s, 500kbit/s |
| Slave EDS |
EDS file import not supported |
| Support slave scanning or not |
Scan via configuration software |
| Termination resistor |
Require an external 120 Ω resistor |
| DeviceNet side power supply |
Require an external 24VDC |
| EtherCAT Specifications |
EtherCAT slave complies with IEC 61158 12 Type (ETG.1000) |
| Maximum EtherCAT input/output length |
512 bytes for each |
| Network interface |
EtherCAT IN and EtherCAT OUT |
| Synchronous mode |
Free run |
| Network cycle time |
As low as 100 μs |
| Isolation |
| Between channels and buses |
Yes |
| Between power supply and bus |
Yes |
| Between channel and power supply |
Yes |
| Display indication |
Power supply green LED display |
| System Power Diagnosis and Warning |
Support |
| Operating temperature |
Operating environment temperature: -20~60℃, relative humidity: 5%~90% (no condensation) |
| Storage temperature |
-40~60 °C |
| Dimensions (Length × Width × Height) |
15×100×80 (mm) |
Previous
SRE6081 | 1 Channel DeviceNet Gateway Module
Next
Indicator Description
Last modified: 2026-08-10
