Technical Specifications
| Model |
SRE6051F |
| Technical specifications |
| Support CAN specifications |
CAN2.0A/B |
| Maximum number of CAN messages |
256 entries |
| Support communication modes |
Producer/consumer mode, query/response mode |
| Termination resistor |
120 Ω (DIP switch) |
| Baud rate |
0kbit/s, 50kbit/s, 100kbit/s, 125kbit/s, 250kbit/s, 500kbit/s, 800kBbit/s, 1Mbit/s |
| EtherCAT Specifications |
EtherCAT slave complies with IEC 61158 12 Type (ETG.1000) |
| ESI file |
Default |
| Max. EtherCAT inputOutput length |
512 bytes for each |
| Network interface |
EtherCAT IN and EtherCAT OUT |
| Synchronous mode |
Free run |
| Network cycle time |
As low as 100 μs |
| Isolation |
| Between channels and buses |
Yes |
| Between power supply and bus |
Yes |
| Between channel and power supply |
Yes |
| Display indication |
Power supply green LED display |
| System Power Diagnosis and Warning |
Support |
| Operating temperature |
Operating environment temperature: -20~60℃, relative humidity: 5%~90% (no condensation) |
| Storage temperature |
-40~60 °C |
| Dimensions (Length × Width × Height) |
15×100×80 (mm) |
Last modified: 2026-08-10
