Menu

Assembly of Drives

Assembly Site

Please install in an electric control cabinet free from sunshine and rain
Do not use this product in corrosive environment with hydrogen sulfide, chlorine gas, ammonia, sulfur, chlorinated gas, acid, alkali, salt
Do not use this product in the presence of flammable gases or near the combustible
Do not install in an environment with high temperature, humidity, dust, or metal dust
Vibration-free site
Installation site contamination level: PD2

Environmental Conditions

Environment conditions of drive installation

Item Description
Operating ambient temperature 0 ~ +40 ℃
Ambient humidity Less than 90%RH (no condensation)
Storage temperature -20~70℃(non-freezing)
Storage humidity Less than 90%RH (no condensation)
Vibration Below 4.9m/s2
Impulse Below 19.6m/s2
Class of protection IP20 Note: Except Terminal (IP00)
Altitude The highest altitude is 5,000m. Derating is unnecessary for 1,000m or below; Derating rate is 1% per 100m rise above 1,000m. Please contact the manufacturer in case of altitudes over 2,000m.
Previous
Assembly
Next
Assembly of Motor
Last modified: 2025-07-14