Wiring diagram
Use the 24VDC power module, connect the power supply with the wiring method as shown below, and a reliably ground the PE (twisted pair is recommended for the power cable).
*24V internal conduction, 0V internal conduction.
Fieldbus wiring
Use standard RJ45 network port and standard crystal connector; the pin distribution is shown in the following table.
| Pin No. | Signal |
| 1 | TD+ |
| 2 | TD- |
| 3 | RD+ |
| 4 | 一 |
| 5 | 一 |
| 6 | RD- |
| 7 | 一 |
| 8 | 一 |
- It is recommended to use Category 5 or higher double shielded (woven net + aluminum foil) STP cable as communication cable.
- The length of cables between devices cannot exceed 100 m.